I pulled out a brand new tube, slaped it in and shot in a CO2, still seamed soft, so started another CO2, Which I've used 2 before, and BANG! I think the tire slipped off the bead and let the tube loose. Maybe should have cleaned up the Stans more, or at all.
So I pull out 2nd tube, brand new again, and eyeing the ofending CO2, decide to give my high volume pump a try. Tube one, I start pumping. the bead comes loose once and I had to let air out and start over, finally get it inflated, and pull off the pump. Air hissing out, the tip of the presta valve was still inside the pump.
I've got one more tube. In it goes, pump it up carefully and start riding. I get 100 Yrds, and the bead came loose and the tube bulged out the side and gets rapped up in the fork. So I started over, took the tire off all the way, wiped up as mush slime as I could get with the socks I use to store tubes, and put the now bulgey misshapen tube back on, put in just enough air to hold me and started riding, sloooowly, watching the tire wobble. Cheers, Think the tires shot, Tubes clearly. The wheal was already iffy but might not be any more out of true, crossing fingers.
I rely on lists and post it notes these days. The good news is, that ride was generaly ok. It didn't blow at 23 MPH, and I started pulling some maualles for a couple seconds. 
